Top-of-the-line band saws
Delicate crop varieties, uneven terrain, and the quest to optimize performance and minimize losses place special demands on today’s cutting units. Geringhoff’s belt-type cutting units exceed expectations. They offer the greatest flexibility on the market and redefine low-to-the-ground harvesting!
All New! XFR
Unbeatable Flexibility
The XFR (XtremeFlex Razor) is the newest in our line-up of drapers. Our all-around draper is 50' wide and is equipped with a 3-section reel, 3-section frame and fully flexible cutterbar. The lightweight design of the wings maximizes the responsiveness in uneven terrain. The XtremeFlex Razor’s wings boast a flex ±7° for a total flex range of 52”. Designed for high volume harvesting with the widest center belt (87”) and feeder house opening, the XtremeFlex Razor maximizes harvesting with all models of larger combines.Available in 50 foot width only.
| Model | Width (Working / Outer) | Reel Type | Frame Type | Flex Range | Cutter Bar | Total Weight | |
|---|---|---|---|---|---|---|---|
| XFR 50 | 50' / 51' | 3-Section | Flexible | 52" | Flexible | 12,455 lbs |
Xtreme Performance
The XFR is designed to offer xtreme performance in all crop and field conditions. From its all-new auger design to its enhanced reel design, the XFR is engineered to capture the crop others leave behind.
- Hydraulic reel drive with 50% more torque*
- Ultra-lightweight wings are 45% more flexible*
- Wings flex ±7° for total flex range of 14°
- New feeding auger design and improved performance
- 60% more intake auger torque*
- 24% faster intake speeds*
* Compared to the TruFlex Razor
Designed for Xtreme Harvesting
Features at a Glance
Geringhoff Advantages
From the frame and bodywork to the flip-over reel and cutting system, our draper heads are engineered to provide unmatched performance, reliability, countering, and flexibility in every field.
Features
Centralized Drive Design
Unlike competitors who spread mechanics across the draper, the XFR houses all drives in the center. This precision engineering results in lighter wings (and end panels) for quick adjustment and adaptation to the contours of any field.
- Reel drive
- Central knife drive
- Hydraulic pumps
- Oil tank in frame
- Cross auger drive
Features
Floating Feeding Auger
Featuring a new floating design, the large diameter (25”) feeding auger provides 1.6” of height compensation to maintain optimal crop flow to the combine in any crop or field conditions. Engineered to handle heavy and voluminous harvesting conditions, the feeding auger boasts 24% faster intake speeds and 60% more torque than the TruFlex Razor. Tool-less auger tine adjustment allows for quick adaption during harvest.
Features
Wide Belts for Crop Flow
The XFR utilizes wide belts designed to accommodate high-volume harvesting and larger combines. At 87”, the XFR's center belt is 7”– 8" wider than other major manufacturers and is the widest center belt on the market. Paired with deep (41”) side belts that provide uniform crop flow, crops are gently and efficiently transferred to the combine via the large feeder house opening. Reversible center belt and side belt speeds are controlled via in-cab terminal.
Features
Enhanced Reel and Tines
3-section reel and 3-section frame provide consistent distance between the lightweight flip-over reel and the cutter bar. The improved reel drive provides increased efficiency and higher torque (+50%). Reel tine spacing of 4" provides optimal crop flow and tine angle is adjustable to 9 different positions for harvesting any crop in any condition. New angled sweeper tines at end of the reel help capture every grain and reduce losses.
Features
Superior End Panels
Since end panels are free of drives, they are ultra-lightweight and more responsive to field conditions. In fact, the lightweight floating end panels allow for 45% more flexibility than the TruFlex Razor. The drive free end panels are extra narrow which reduces contact with adjoining crop and diminishes crop damage and loss. Extra narrow end panels close the gap between the panel and the side of the belt to improve yield potential and are moveable (tipping) to help improve crop flow along the sides.
Features
Flexible Cutting System
Outfitted with the Schumacher EasyCut II, the cutting system provides durable industry-leading performance with low maintenance. Knives are mounted alternately for less wear on cutting edges and guards - which are made of spring steel making them lighter while providing higher stability. The flexible cutter bar provides ±3" of ground contouring travel for a total of 6" of cutter bar flex. Utilizing height control sensors distributed across the full width of the head, the flexible cutter bar increases yield potential with its ability to cut nearly at ground level.
Features
Xtreme in Flex or Fix
Whether operating in Flex or Fix mode, the XFR offers xtreme performance starting with active height control in both modes. In Flex mode, the cutter bar is flexible and cutting height under 1.5” is maintained using height detection at the cutter bar. A total of 12 sensors help ensure a razor close cut in any field. In Fix mode, the cutter bar is rigid and cutting height of 1.3” – 11.8” is controlled using 4 sensor with 2 drag rods each (8 total sensors). The 27” drag rod distance offers a 75% increase in spacing over the TruFlex Razor and provides wider ground sensing.
Crop Dividers
Geringhoff offers multiple crop dividers to meet different harvest needs. Thanks to a tool-free design, dividers are quickly and easily changed to adapt to any crop and field condition.
Key Advantages
- Clean cutting edges
- Helps reduce crop losses
- Quick and tool-free design prevents downtime
Canola Kit
The optional canola kit allows an efficient and almost loss-free harvesting of canola and big crops. It consists of two side-mounted vertical knives and a large cross auger. The components are hydraulically driven and can be individually switched on or off.
Key Advantages
- Optimal crop flow due to the large cross auger
- Brightly colored side knives holder for optimal visibility
- Reduce crop losses with side panel extension
- Quick and tool-free change of side knives prevents downtime
Maximize Your Yields
Integrated Air System (IAS)
Especially sensitive crops that tend to produce volunteers during their final phase of ripening require special harvesters that feature the appropriate technology to minimize losses caused by seeds and pods that have escaped the reel. That's why our Integrated Air System (IAS) is available on both the TruFlex and TruFlex Razor draper heads.Utilizing controlled airflow, our state-of-the-art IAS is precisely designed to maximize yields for sensitive crops. By blowing air in a controlled way, a large percentage of the seeds and pods that have escaped the reel are carried to the draper belt and feed to the threshing system.
Comparison
With IAS
Controlled air flow gently blows grains to draper belt.
Comparison
Without IAS
Grains are lost and scatter away from the draper belt.
Superior Solution for Sensitive Crops
IAS Advantages
- Specifically designed for harvesting very sensitive crops
- Maximizes yield by gently blowing dropping grains back to the belt
- All airlines integrated in the head - no exterior lines to damage pods
Draper Heads
Compare Models
| Model | Width (Working / Outer) |
Reel Type |
Frame Type |
Flex Range |
Cutter Bar |
Total Weight |
|
|---|---|---|---|---|---|---|---|
| F 30 | 30' / 31' | 1-Section | Rigid | None | Flexible | 6,170 lbs | |
| TFR 35 | 35' / 35.73' | 3-Section | Flexible | 26.5" | Flexible | 8,600 lbs | |
| TFR 40 | 40' /40.73' | 3-Section | Flexible | 31" | Flexible | 9,260 lbs | |
| TFR 45 | 45' / 45.73' | 3-Section | Flexible | 36" | Flexible | 9,590 lbs | |
| XFR 50 | 50' / 51' | 3-Section | Flexible | 52" | Flexible | 12,455 lbs |
*NOTE: Weights may vary depending on combine model and equipment.
